Important Safety Information

Your P3ProSwing is designed to give you solid, reliable and supremely accurate swing information – and help you have a great time while you develop your swing. 

The following WARNINGS are supplied to help ensure the safety of users and observers, help protect your personal property and that of others, and to protect your P3ProSwing unit from possible damage. 

This symbol  points out important safety precautions.  

ELECTRICAL HAZARDS

The P3ProSwing operates using a 5 VDC power adapter plugged into a standard wall outlet.  Electrical shock can occur if used in a moist or wet environment. Use P3ProSwing only under dry conditions.

 If you use an extension cord with your power adapter, ensure that the total ampere rating of all items plugged in to the extension cord does not exceed the ampere rating of the extension cord.

 Use only the power adapter provided with the P3ProSwing.  Use of another power adapter will cause damage to the P3ProSwing.

Ensure that all power supply and data cables for the P3ProSwing and for your computer are connected according to instructions and the manufacturer’s specifications, and are free and clear of the swing path and direction of ball travel.   

Inspect cords and cables periodically, and replace any that are worn or damaged.

 When not in use, disconnect the power adapter from the P3ProSwing and store in a dry location.

INJURY AND PROPERTY DAMAGE HAZARDS

Ensure that the P3ProSwing is set up on a solid, flat and level surface.

 Ensure that your surroundings are free and clear from obstructions.  If using your P3ProSwing indoors, ensure that you have adequate ceiling height and sufficient room from walls, ceiling fixtures and furnishings to engage in a full swing.

Ensure that all observers are well clear of the swing path and ball flight path, and that your computer, monitors and other belongings are free and clear of the swing path and the path of balls.  Be aware that a stray golf ball may cause damage to computer equipment and personal belongings, and/or serious injury to observers.

 Ensure that the power adapter and serial port cables between the Sensor Unit and your computer are clear of the golfer’s swing path, players and observers.

 The power adapter may become hot during normal operation of the P3ProSwing.  Use care when handling the adapter during or immediately after operation.

 Place the power adapter in a ventilated area.  Plugging directly to a wall outlet is best.  If you plug the adapter into a power strip or extension cord, do not  cover the power adapter with any items that will reduce cooling.

 Use only an adequate golf ball catch net.  Even with the use of an adequate catch net, damage may occur to your surroundings and equipment utilized in the operation of the P3ProSwing.

Use plastic or foam balls until you’re familiar with the P3ProSwing and how it operates.  Note that the use of real golf balls may cause damage, injury or death.

PROTECTING YOUR EQUIPMENT

Keep the P3ProSwing away from heat sources such as heating vents, radiators, fireplace, electric heater, or other heat-generating devices or otherwise expose it to temperatures in excess of 60°C (140°F).

 Do not attempt to service the P3ProSwing or remove the cover of the sensor unit or power supply.

 Do not insert any objects into the light guide slots.  Doing so may damage the optics.  If cleaning is required, see care and cleaning instructions.

  Plastic tees are supplied with your P3ProSwing.  Wooden tees are not recommended due to breakage.